Front Door Lamps and Switches

Front Passenger Door Window Regulator Switch E107

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Power Window Switch Illumination (L53) , which cannot be replaced separately, is integrated in the front passenger door window switch.

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Carefully pry the grip panel - 1 - up at the retaining tab in the - direction of the arrow - with the (3409).






- Pull the grip handle forward and remove it from the door trim. Be careful of the connected wires.

- Release and disconnect the connector - arrow - and remove the grip panel.






- Release the four retaining tabs - arrows - and remove the passenger door window regulator switch - 1 - from the grip panel.






Installing

Install in reverse order of removal.