Input Shaft: Description and Operation

Input Shaft, Output Shafts, Differential and Selector Rods Overview






1 Output Shaft, 1st to 4th Gears

• Installed position, refer to => [ Selector Shafts and Forks, Installed Position ] Selector Shafts and Forks, Installed Position.

• Disassembly and assembly, refer to => [ Output Shaft, 1st to 4th Gears ] Output Shaft, 1st to 4th Gears.

2 Selector Shaft with Selector Fork for 1st and 2nd Gears

• Installed position, refer to => [ Selector Shafts and Forks, Installed Position ] Selector Shafts and Forks, Installed Position.

• disassembly and assembly, refer to => [ Selector Forks ] Selector Forks.

3 Selector Shaft with Selector Fork for 3rd and 4th Gears

• Installed position, refer to => [ Selector Shafts and Forks, Installed Position ] Selector Shafts and Forks, Installed Position.

• Disassembly and assembly, refer to => [ Selector Forks ] Selector Forks.

4 5th, 6th and Reverse Gear Output Shaft

• Installed position, refer to => [ Selector Shafts and Forks, Installed Position ] Selector Shafts and Forks, Installed Position.

• Disassembly and assembly, refer to => [ Output Shaft, 5th, 6th and Reverse Gears ] Output Shaft, 5th, 6th and Reverse Gears.

5 Selector Shaft with Selector Fork for 5th and 6th Gears

• Installed position, refer to => [ Selector Shafts and Forks, Installed Position ] Selector Shafts and Forks, Installed Position.

• Disassembly and assembly, refer to => [ Selector Forks ] Selector Forks.

6 Reverse Gear Shift Fork

• Installed position, refer to => [ Selector Shafts and Forks, Installed Position ] Selector Shafts and Forks, Installed Position.

• Differentiation, refer to => [ Reverse Gear Selector Fork Differentiation ] Selector Forks.

• Disassembly and assembly, refer to => [ Selector Forks ] Selector Forks.

7 Input Shaft

• Installed position, refer to => [ Selector Shafts and Forks, Installed Position ] Selector Shafts and Forks, Installed Position.

• Disassembly and assembly, refer to => [ Input Shaft Overview ] Input Shaft Overview.

• Always replace the grooved ball bearing (- item 6 - in the => [ Input Shaft Overview ] Input Shaft Overview) on the input shaft.

8 Reverse Shaft

• With a thrust washer.

9 Thrust Washer

10 Breather Assembly

• Connected to the slave cylinder.

11 Clutch Housing

• Disassembly and assembly, refer to => [ Clutch Housing ] Clutch Housing.

12 Input Shaft Seal

• Removing and installing, refer to => [ Input Shaft Seal ] Input Shaft Seal.

13 O-ring

• Installed on the line connection.

• Coat with brake fluid before installing.

14 Clutch Slave Cylinder with Release Bearing

15 Bolt

• Quantity: 3

• Always replace.

• Removing and installing, see - item 4 - in the => [ Clutch Release Mechanism Overview ] Description and Operation.

16 Bolt

• Removing and installing, see - item 12 - in the => [ Differential ] Service and Repair.

17 Flange Shaft with Pressure Spring

• Removing and installing, refer to => [ Right Flange Shaft and Seal ] Right Flange Shaft and Seal.

• Assembling, refer to => [ Differential ] Service and Repair.

18 Differential

• Disassembly and assembly, refer to => [ Differential ] Service and Repair.