Diagram 78/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Electronic damping control module, Instrument cluster control module, Data bus on board diagnostic interface, Instrument cluster, Diagnostic connection





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J250 - Electronic damping control module Component Locations Diagrams

J285 - Instrument cluster control module Control Modules in Interior

J533 - Data bus on board diagnostic interface Control Modules in Interior

K - Instrument cluster Control Modules in Interior

T16d - 16-pin connector

T20e - 20-pin connector

T32c - 32-pin connector

T47a - 47-pin connector

U31 - Diagnostic connection, on the diagnostic connector

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

Previous Diagram 78/5 (Tracks 43-56)