Steering Angle Sensor G85, through 10.09

Steering Angle Sensor G85, through 10.09

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

Remove the following components in order:

• Danger of the airbag deploying!

• The airbag could deploy if the unit is mishandled.

• Follow all Safety Precautions when working on an airbag.

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the steering column electronics control module (J527). Refer to => [ Steering Column Electronics Control Module J527, through 10.09 ] Steering Column Electronics Control Module J527, through 10.09.

- Remove Airbag Spiral Spring/Return Spring With Slip Ring (F138). Refer to => [ Airbag Spiral Spring/Return Spring With Slip Ring F138, through 10.09 ] Airbag Spiral Spring/Return Spring With Slip Ring F138, through 10.09.

- Disengage catches - arrows - and pull off segment sensor for steering angle sensor - 1 - toward rear from steering column switch unit.






Installing

Install in reverse order of removal.