Instrument Panel Fuse Panel

Instrument Panel Fuse Panel

Follow the procedure in the repair information when disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)

• Removal Wedge (VAS 3409)

Follow the procedure in the repair information when disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

- Remove side cover - 1 - of instrument panel, do this by inserting the (VAS 3409) or a screwdriver into recess - 2 - and pry off cover - 1 - in - direction of arrow -.






- Remove the bolts - arrows - and the fuse panel - 1 -. Be careful of the connected wires.






Installing

Install in reverse order of removal. Note the following:

- Tighten the bolts to 4 Nm.