Rear Door Lamps and Controls

Rear Window Switches E52 and E54

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Removal and installation is performed at the Left rear power window switch in left rear door (E52) and Right rear window switch in right rear door (E54) in the same way and is described for only one switch.

• Power Window Switch Illumination (L53) , which cannot be replaced separately, is integrated in Left rear power window switch in left rear door.

• Power Window Switch Illumination (L53) , which cannot be replaced separately, is integrated in Right rear window switch in right rear door.

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Carefully pry the grip panel - 1 - up at the retaining tab in the - direction of the arrow - with the (3409).






- Pull the grip handle forward and remove it from the door trim. Be careful of the connected wires.

- Release and disconnect the connector - arrow - and remove the grip panel.






- Release the four retaining tabs - arrows - and remove the passenger door window regulator switch - 1 - from the grip panel.






Installing

Install in reverse order of removal.