Power Door Lock Switch: Service and Repair

Driver Interior Locking Button (E308)

The following components are integrated in the Driver Interior Locking Button:

• Push Button Illumination (L76)

• Driver Interior Locking Indicator Lamp (K174)

Removal

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Remove the door trim.

- Disengage and disconnect harness connector - 1 -.






- Release the four retaining tabs - arrows - and remove the driver interior locking button - 1 - back from the door trim.






Installation

Install in reverse order of removal.