Front Seat Belt Height Adjuster, Passat from MY 2006 and Passat Wagon from MY 2006

Front Seat Belt Height Adjuster, Passat from MY 2006 and Passat Wagon from MY 2006

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove upper B-pillar trim. Refer to => [ B-Pillar Upper Trim, Passat from MY 2006 and Passat Wagon from MY 2006 ]

• Belt anchor does not need to be removed.

- Remove the bolt - 1 - (40 Nm) and remove the belt relay - 2 - from belt height adjuster.

- Remove bolt - 3 - (20 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.






Installing

- Install in reverse order of removal.