Side Airbag Module, Special Notes
Side Airbag Module, Special Notes
• Place any removed head curtain airbag modules back in their transport containers or on a clean and even surface with a cloth underneath.
• They may be folded as long as this does not damage them, especially the protective sleeve.
• Handle head curtain airbag modules with great care when removing and installing them to prevent causing any damage.
• As long as the gas generator is NOT attached, hold it securely when transporting, removing, installing, etc.
• Always replace damaged pillar trim panels, never repair.
• After body repairs, inspect the body for weld splatter, deformations and chafing areas near the head curtain airbag (compare with opposite side if necessary).
• If a deployed head curtain airbag is replaced, the headliner, door seals with weather stripping, curtain airbag guides, grab handle brackets, and the A, B, C and (if equipped) D-pillar trim must be replaced. If damaged, the rear interior lights, the roof grab handles and the roof end strip must be replaced.