Brake Light Switch: Service and Repair

Brake Lamp Switch (F)

Removing

- If the vehicle has a coded radio, get the radio code from the customer before beginning.

- Disconnect battery.

- Remove the intake hose, air filter housing (diesel engines and some gasoline engines) and the battery.

On vehicles with a 6-cylinder gasoline engine, the battery is in the luggage compartment, accordingly only air filter housing must be removed.

- Remove the battery carrier.

- Disconnect the connector - 1 - from brake lamp switch.






- Remove bolt - 2 - from brake master cylinder.

- Pull the brake lamp switch - 3 - upward and off from the brake master cylinder and remove it from the clip at the bottom.

Installing

- Install in reverse order of removal.