Fiber Optic Cable for Left and Right Front Sill Panel Ambient Lighting W67 and W68

Fiber Optic Cable for Left and Right Front Sill Panel Ambient Lighting W67 and W68

Optional Equipment

• Removing and installing on the left side of the vehicle is described. Removing and installing on the right side is identical.

• The illuminated door sill panel is installed only on the driver and passenger sides.

• The illuminated door sill panel - 1 - does not have regular bulbs, but rather a wiring harness with an LED.

• It is not possible to service it. If damaged, then the illuminated door sill panel must be replaced.

Removing

- Remove the sill panel strip.

- Cut the cable tie - 3 - and disconnect the connector - 2 -.






Installing

Install in reverse order of removal.