Door Lock Reminder Light: Service and Repair

Central Locking -SAFE- Indicator Lamp K133

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Remove the door trim panel.

- Unclip Central Locking -SAFE- Indicator Lamp - 1 - from door trim by pressing retaining tabs - arrows - together.






- Disconnect harness connector - 1 - of Central Locking -SAFE- Indicator Lamp - 2 -.






Installing

Install in reverse order of removal. Note the following:

• Make sure the central locking -SAFE- indicator lamp engages in the door trim securely.