Diagram 75/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Temperature regulator door motor position sensor, Evaporator temperature sensor, Temperature regulator door motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G92 - Temperature regulator door motor position sensor Climatic (Manual Climate Control) System Overview Temperature Regulator Door Motor -V68- /Position Sensor -G92-

G308 - Evaporator temperature sensor Climatronic (Automatic Climate Control) System Overview [1][2]Diagrams

J301 - A/C control module Control Modules in Interior A/C Control Module -J301-

J533 - Data bus on board diagnostic interface Control Modules in Interior

T6bf - 6-pin connector

T16j - 16-pin connector

T20b - 20-pin connector

T20e - 20-pin connector

V68 - Temperature regulator door motor Climatic (Manual Climate Control) System Overview Temperature Regulator Door Motor -V68- /Position Sensor -G92-

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B595) - Connection 2 (in Climatic wiring harness)

(L31) - Connection (5 Volt) (in A/C system wiring harness)

Previous Diagram 75/4 (Tracks 29-42)

Next Diagram 75/6 (Tracks 57-70)