Bench Seat Cover and Cushion, Passat from MY 2006

Bench Seat Cover and Cushion, Passat from MY 2006

• The "Sportline" version is represented in the following description. The procedure is similar for other equipment versions.

Removing

- Remove the seat bench, Passat from MY 2006, refer to => [ Seat Bench, Passat from MY 2006, Passat CC from MY 2009 and CC from MY 2010 ] Seat Bench, Passat from MY 2006, Passat CC from MY 2009 and CC from MY 2010.

- Cut through all upholstery clips - arrows - all around bottom side of bench seat with suitable pliers.

- Loosen cover - 1 - at outer sides from upholstery - 2 - and roll up the sides.






- Cut through all upholstery hooks - arrows - with a diagonal cutter.

- Remove the cover - 1 - from the padding - 2 -.






Installing

• When securing cover - 1 - to upholstery - 2 - using Upholstery Clip Pliers (V.A.G 1634).

- Install in reverse order of removal.