Diagram 35/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Seat Heater Control Module, Front Passenger's Seat Lumbar Support Adjustment Switch, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E177 - Front Passenger's Seat Lumbar Support Adjustment Switch Lumbar Support Adjustment Switch -E176- / -E177-

J810 - Driver's Seat Adjustment Control Module

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

T4vk - 4-Pin Connector, black

T4vl - 4-Pin Connector, black

T4vs - 4-Pin Connector, black, in seat

T6bm - 6-Pin Connector

T10c - 10-Pin Connector, black, connector station driver's side, below seat

T10d - 10-Pin Connector, black, connector station front passenger's side, below seat

T16d - 16-Pin Connector, Data Link Connector (DLC)

T20e - 20-Pin Connector

T32f - 32-Pin Connector, grey

V126 - Front Passenger's Seat Lumbar Support Curvature Adjustment Motor Lumbar Support Curvature adjustment Motor -V125- / -V126-

V130 - Front passenger Seat Lumbar Support Height Adjustment Motor Lumbar Support Height Adjustment Motor -V129- / -V130-

(95) - Ground Connection 1 (in power seat wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(M1) - Plus Connection 1 (30) (in power seats wiring harness)

Previous Diagram 35/5 (Tracks 43-56)

Next Diagram 35/7 (Tracks 71-84)