Passenger Assist Handle: Service and Repair

Roof Grab Handles

• Removal and installation is described for the right side of the vehicle. Removing and installing on the left side is identical.

Removing

- Swing front right grab handle away - 2 - and open both small cover caps with a small screwdriver.

- Remove two screws - 1 - (2 Nm) and loosen grab handle from adapter plate in roof.

- Swing rear right grab handle away - 4 - and open both small cover caps with a small screwdriver.

- Remove two screws - 3 - (2 Nm) and loosen grab handle from adapter plate in roof.






Installation

- To install, perform the steps used for removal in reverse order.