Dimensional Data for Rear Name Plate

Dimensional Data for Rear Name Plate

Special tools, testers and auxiliary items required

• Hot air gun (V.A.G 1416)

• Adhesive strip remover (VAS 6349)

• The Passat name plate is only an example.

• Different name plates are installed.

• The dimensions are identical for all name plates.






1 Rear lid

2 Name badge

• Repair Information, refer to => [ Name Badge and Brand Emblem Dimensions Repair Information ] Name Badge and Brand Emblem Dimensions Repair Information

• Dimension - a - = 43 mm

• Distance from the side lid edge to the name plate

• - Dimension b - = 20 mm

• Distance from the lower edge of the tail lamp to the name plate