Infotainment - RNS 510 Nav. Radio, Voice Command
91 12 01February 1, 2012
2028501
Vehicle Information
Condition
RNS 510 Navigation Radio, Voice Command Overview
Note:
Technical bulletin only applies to vehicles where full voice commands were switch ON at time of vehicle delivery. Switching ON full voice commands under warranty, where a vehicle was delivered with the feature Switch OFF will result in claim denial.
Technical Background
To provide a guide for switching ON or OFF the full voice command for RNS 510 radio equipped with software 2625 at time of delivery.
Production Solution
Not applicable.
Service
Note:
Both the Bluetooth(R) module & the RNS 510 radio need to be correctly coded for the voice recognition change to take place.
External UHV (Bluetooth�) Module Coding Procedure
^ Select Vehicle Self Diagnosis.
^ Select On Board Diagnostic (OBD).
^ Select 77 - Telephone.
^ Select 009 - Coding.
^ Select Master.
^ Select 009.01 Binary Coding.
^ Highlight byte 1.
^ Enter the correct coding based on the table, and then select "Q".
^ Right arrow to confirm coding.
RNS 510 Coding Procedure
^ Select Vehicle Self Diagnosis.
^ Select On Board Diagnostic (OBD).
^ Select 37 - Navigation.
^ Select 008 - Coding (Service $22).
^ Select Master.
^ Highlight byte 7.
^ Enter the correct coding based on the table, and then select Q".
^ Right arrow to confirm coding.
^ Return to VSD home screen.
Display Reference
Warranty
Information only.
Required Parts and Tools
No special parts required.
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.