Driver Outside Door Handle

Driver Outside Door Handle

The following components are integrated in driver side outside door handle:

• Driver exterior door handle touch sensor (G415)

• Left access/start authorization antenna (R134)

• The complete outer door handle must always be replaced if malfunctioning.

• No coding, basic setting or adaptation is necessary when outside door handle is replaced. Erase the entry in the DTC memory via "guided fault finding" with the Vehicle Diagnostic Tester.

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Remove the left front exterior door handle.

Installing

Install in reverse order of removal.