Transmission, Transporting

Transmission, Transporting

Special tools, testers and auxiliary items required

• Transmission Support Jig (3336)

• Shop Crane - Load Cap = 700-1200 KG (VAS 6100)

- Install the transmission support jig (3336) to the clutch housing.






- Unlock and move the bar - arrow - using the locking bolt.






Number of visible holes = 5.

- Lift the transmission using shop crane - load cap = 700-1200 KG (VAS 6100) and transmission support jig (3336).

- Set the transmission down, for example, into the transport container.