Fluid Filter - A/T: Service and Repair

Transmission Fluid Filter

Removing

- Remove the transmission pan. Refer to => [ Transmission Fluid Pan ] Service and Repair.

- Remove the filter bolts - arrows -.






- Remove the filter - A - from the valve body.

Installing

- Lightly coat the seal on the filter suction collar with transmission fluid.

- Replace the filter if the gaskets are loose or faulty.

- Install the filter - A - to the valve body and tighten the bolts - arrows -. For the correct tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.






- Install the pan. Refer to => [ Transmission Fluid Pan ] Service and Repair.

- Fill the transmission fluid and check the level. Refer to => [ Transmission Fluid Level, Checking and Filling ] Transmission Fluid Level, Checking and Filling.