Evaporator Housing

Evaporator Housing






1 Screws

• Tightening specification: 1.5 Nm

2 Upper Section Of Evaporator Housing

3 Screws

• Tightening specification: 5 Nm

• Quantity: 2

4 Threaded Plate

• To the threaded connectors for the refrigerant lines on the evaporator

5 Expansion Valve

• Removing and installing, refer to => [ Expansion Valve ] Service and Repair.

6 Seal / Insulation

• Heat insulation for expansion valve.

7 Lower Section Of Evaporator Housing

8 Evaporator

• Check insulation, it must be completely present.

• Removing and installing, refer to => [ Evaporator ] Service and Repair.