Front Bumper Impact Member Assembly Overview

Front Bumper Impact Member Assembly Overview






1 Front bumper carrier

• Note the installed dimension, refer to => [ Installed Dimension for Front Bumper
Carrier on Lock Carrier ]

2 Bolt

• 2 on each side

• Note the installed dimension, refer to => [ Installed Dimension for Front Bumper
Carrier on Lock Carrier ]

• Tightening specification: 8 Nm

3 Foam piece

• Self-adhesive

• Not installed in all models

4 Bolt

• 4 on each side

• Tightening specification: 60 Nm

Installed Dimension for Front Bumper Carrier on Lock Carrier





Follow the following steps when installing the front bumper carrier - 1 - on the lock carrier - 2 -.

Dimension - a - = 1 mm

Dimension - b - = 10 mm

Bolt - 3 - tightening specification: 8 Nm.