Adjustment in Longitudinal Direction

Adjustment in Longitudinal Direction






Door window - 1 - must be guided at least over the elevation of seal - 3 -.

Dimension - a - of door window - 1 - with respect to side window - 2 - must be uniformly 7 mm +/- 1 mm.

- Remove the front door trim.

- Lift off the cap for the clamping bracket bolts - 4 -.

- Loosen the front and rear bolts - 4 - on the clamping bracket - 5 -, but do not remove them.

- Adjust the door window lengthwise until the dimension - a - is reached.

- Tighten the bolts - 4 - on the front and rear of the clamping bracket to the tightening specification: 6 Nm.