Front Door Window, Door Window Height Adjustment, Checking and Adjusting

Door Window Height Adjustment, Checking and Adjusting






The door window - 1 - must lower evenly into the inner door seal - 5 - to the dimension - a - = 8,5 mm +/- 1 mm

- Attach the gauge (T10391) to the door window and adjust the dimension- a - to (8.5 mm +/- 1 mm).

The door window may only protrude beyond front window guide - 4 - by maximum 1 mm to 2 mm dimension - b -.

- Lower the door window - 1 - all the way to the stop.

- Press the switch again. The door window moves to the end stop.

- Remove the cap on the underside of the door.

- Install the front and rear adjusting bolts - 2 - on the window regulator - 3 - until the dimensions - a - and - b - are reached.

• One turn = 1 mm adjustment.

• Right rotation = door window up, left rotation = door window down.