Preparing New Window without Pre-Coating for Glazing

Preparing New Window without Pre-Coating for Glazing

All windows as replacement parts are not pre-coated.

• The application area for adhesive bead 3 is not pre-coated and not primed.

• The sealing lip is part of a new windshield.

- Clean window circumference to width of 20 mm all around using cleaning solution. Refer to Parts Catalog.

- Then dry the edge of the window with a lint-free cloth.

The ceramic coating on the glass is not a glass/paint primer. It must be primed before the application of adhesive sealing material! Use only glass/paint primer D 009 200 02.

- Apply the glass/paint primer - 2 - evenly in a train using the applicator- 1 -. Refer to Parts Catalog.






• Drying time is approximately 10 minutes