Transmission Housing Overview

Transmission Housing Overview






1 Transmission Housing

• When replacing: Adjust the output shafts and differential, refer to => [ Adjustment Overview ] Adjustment Overview.

• Changes to the cover/input shaft mount area, see - item 4 - in => [ Transmission Housing and Shift Unit ] Transmission Components Overviews.

• Refer to the Parts Catalog.

2 Cover

• Removing, refer to => [ Removing the Cover ] Transmission Housing.

• Installing, refer to => [ Installing the Cover ] Transmission Housing.

3 Oil Drain Plug

• Tightening specification, refer to => [ Different Versions of the Oil Fill and Drain Plugs ] Service and Repair.

4 Seal

• Always replace, if equipped.

5 Oil Fill Plug

• Tightening specification, refer to => [ Different Versions of the Oil Fill and Drain Plugs ] Service and Repair.

6 Locking Pin

• For adjusting the shift mechanism. Refer to => [ Shift Mechanism, Adjusting ] Adjustments.

• Can be replaced with transmission assembled.

• Removing, refer to => [ Removing the Locking Pin for the Gear Shift Shaft ] Transmission Housing.

• Installed position, refer to => [ Installed Position: Locking Pin ] Transmission Housing.

• Installing, refer to => [ Driving the Locking Pin for the Gear Shift Shaft In up to the Tool Stop ] Transmission Housing.

7 Bushing

• For the selector shafts.

• Removing, refer to => [ Removing the Selector Shaft Bushing ] Transmission Housing.

• Installing, refer to => [ Installing the Selector Shaft Bushing as Far as the Stop on the Tool ] Transmission Housing.

8 Retaining Sleeve

• Removing when the transmission is disassembled. Refer to => [ Removing the Retaining Sleeve from the Transmission Housing ] Transmission Housing.

• Removing when the transmission is assembled. Refer to => [ Removing the Retaining Sleeve from an Assembled Transmission using the ] Transmission Housing.

• Different retaining sleeves, refer to => [ Lock Sleeve Differentiation ] Transmission Housing.

• Installing a retaining sleeve with a shoulder, refer to => [ Driving in the Locking Sleeve with a Shoulder as Far as the Stop on the Tool ] Transmission Housing.

• Installing a retaining sleeve without a shoulder, refer to => [ Driving in the Locking Sleeve without a Shoulder as Far as the Stop on the Tool ] Transmission Housing.

9 Needle Sleeve

• For the reverse shaft.

• Always replace if removed.

• Removing, refer to => [ Removing the Reverse Shaft Needle Sleeve from the Transmission Housing ] Transmission Housing.

• Installing, refer to => [ Installing the Needle Sleeve into the Transmission Housing ] Transmission Housing.

10 Outer Race/Tapered Roller Bearing

• Output shaft, 5th, 6th and reverse gears.

• Removing and installing, refer to => [ Output Shaft, 5th, 6th and Reverse Gears ] Output Shaft, 5th, 6th and Reverse Gears.

• When replacing: adjust the output shaft for 5th/6th and reverse gear. Refer to => [ Output Shaft, 5th, 6th and Reverse Gears, Adjusting ] Output Shaft, 5th, 6th and Reverse Gears, Adjusting.

11 Adjusting Shim

• Output shaft, 5th, 6th and reverse gears.

• Adjustment overview, refer to => [ Adjustment Overview ] Adjustment Overview.

12 Outer Race/Tapered Roller Bearing

• Output shaft, 1st to 4th gears.

• Removing and installing, refer to => [ Output Shaft, 1st to 4th Gears ] Output Shaft, 1st to 4th Gears.

• When replacing: adjust the output shaft for 1st to 4th gear. Refer to => [ Output Shaft, 1st to 4th Gears, Adjusting ] Output Shaft, 1st to 4th Gears, Adjusting.

13 Adjusting Shim

• Output shaft, 1st to 4th gears.

• Adjustment overview, refer to => [ Adjustment Overview ] Adjustment Overview.

14 Outer Race/Tapered Roller Bearing

• For the differential.

• Removing and installing, refer to => [ Differential ] Service and Repair.

• When replacing: adjusting the differential, refer to => [ Differential, Adjusting ] Differential, Adjusting.

15 Adjusting Shim

• For the differential.

• Adjustment overview, refer to => [ Adjustment Overview ] Adjustment Overview.

16 Bushing

• For the gear shift shaft.

• Removing, refer to => [ Removing the Gear Shift Shaft Bushing ] Transmission Housing.

• Installing, refer to => [ Installing the Gear Shift Shaft Bushing as Far as the Stop on the Tool ] Transmission Housing.

17 Plug

• Removing, refer to => [ Removing the Plug ] Transmission Housing.

• Installing, refer to => [ Installing the Plug ] Transmission Housing.

18 Seal

• For the left flange shaft.

• Removing and installing, refer to => [ Left Flange Shaft and Seal ] Left Flange Shaft and Seal.