Shift Cable: Testing and Inspection

Selector Lever Cable, Checking

Short Description

The selector lever cable must be disconnected from the transmission in order to check it for ease of movement. Do not let the removed end touch anything.

Then selector lever is removed and installed again on the transmission.

After that, the selector lever cable must be adjusted. Refer to => [ Selector Lever Cable, Adjusting ] Adjustments.

Do not lubricate the cable connections.

Checking

- Move the selector lever into the "P" position.

- Remove the complete air filter housing.

- Remove the cable from the lever on the transmission.

- Move the selector lever from "P" to "S" and back to "P" several times.

• The selector lever must move easily.

- Adjust the selector lever cable. Refer to => [ Selector Lever Cable, Adjusting ] Adjustments.