Steering Control Module: Locations
Control modules in engine compartment
Power steering control module -J500-
Pin Arrangements:
A - Power steering control module -J500-
Connector:
B - 2-pin connector -T2l- inside the wiring harness
1 - Ground connection 2 in engine compartment, left -640-
2 - Fuse 3 on fuse panel A -SA3-
C - 3-Pin connector -T3ao- inside the wiring harness
1 - Powertrain (CAN bus low) connection 1 in the main wiring harness -B390-
2 - Powertrain (CAN bus high) connection 1 in the main wiring harness -B383-
3 - Positive connection 4 (15a) in instrument panel wiring harness -A199-
D - 5-pin connector -T5g- inside the wiring harness
1 - Not used
2 - Steering torque sensor -G269- (T4ae/4)
3 - Steering torque sensor -G269- (T4ae/3)
4 - Steering torque sensor -G269- (T4ae/1)
5 - Steering torque sensor -G269- (T4ae/2)