2.5L

Generator Overview

Bolts and nuts, refer to the Electronic Parts Catalog (ETKA).






1 Bolt

• 25 Nm

2 Ribbed Belt

• Checking, refer to => [ Ribbed Belt, Checking ] Testing and Inspection.

• Removing and installing

• Routing.

3 Ribbed Belt Pulley

• Without free wheel: 65 Nm

• With free wheel: 80 Nm

4 Generator (C)

• Removing and installing, refer to => [ Generator (C) ] Generator (C).

• Checking, refer to => [ Generator, Checking ] Testing and Inspection.

5 Voltage Regulator (C1)

• Removing and installing, refer to => [ Removal and Installation ] Generator (C).

6 Bolt with Washer and Threaded Piece

• 4 Nm

7 Cap

8 Bolt

• 2 Nm

9 Cap For The Carbon Brushes

No illustration

• B+ wire nut to rear side of generator: 20 Nm

• Wire clamp nut to the back of the generator: 3.2 Nm