DSG transmission Mechatronic -J743- -DSG transmission 0AM (DSG)

Control modules in engine compartment

DSG transmission Mechatronic -J743- -DSG transmission 0AM (DSG)


Component Location:





In the Direct Shift Gearbox -J743-


Pin Arrangements:







A - DSG transmission Mechatronic -J743-
Connector:

B - 25-Pin connector -T25- inside the wiring harness

1 - Not used

2 - Not used

3 - Not used

4 - Not used

5 - Not used

6 - Not used

7 - Not used

8 - Ground connection (in automatic transmission wiring harness) -114-

9 - Fuse 17 on fuse holder B --SB17--

10 - Positive connection 4 (15a) in instrument panel wiring harness -A199-

11 - K-diagnostic lead connection (in instrument panel wiring harness) -A76-

12 - Powertrain (CAN bus low) connection 1 in the main wiring harness -B390-

13 - Powertrain (CAN bus high) connection 1 in the main wiring harness -B383-

14 - Not used

15 - Not used

16 - Multifunction transmission range switch -F125- (T10n/2) Clutch position sensor -G476- (T5m/4) vehicle electrical system control module -J519- (T73b/55)

17 - Not used

18 - Not used

19 - Not used

20 - Not used

21 - Not used

22 - Not used

23 - Not used

24 - Ground connection (in automatic transmission wiring harness) -114-

25 - Fuse 18 on fuse holder B -SB18--


Note:
• Only for Direct Shift Gearbox 02E (DSG)