Diagram 110/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle electrical system control module, Data bus on board diagnostic interface, Powertrain CAN bus high connection 1 (in main wiring harness), Comfort system CAN bus high connection 1 (in main wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

GX22 - Auxiliary instruments

J217 - Transmission control module Locations Locations Transmission Control Module -J217-

J431 - Headlamp range control module Control modules in interior

J519 - Vehicle electrical system control module Locations Control modules in interior

J533 - Data bus on board diagnostic interface

T10ak - 10-pin connector

T20 - 20-pin connector

T26c - 26-pin connector

T52 - 52-pin connector

T73b - 73-pin connector

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

Previous Diagram 110/6 (Tracks 57-70)

Next Diagram 110/8 (Tracks 85-98)