Diagram 37/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle electrical system control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G273 - Interior monitoring sensor

G397 - Rain/light recognition sensor

J245 - Power sunroof control module [1][2]Diagrams

J519 - Vehicle electrical system control module Locations Control modules in interior

J533 - Data bus on board diagnostic interface

J723 - Keyless access authorization antenna reader Control modules in interior

T3ae - 3-pin connector

T3g - 3-pin connector

T4bz - 4-pin connector

T10f - 10-pin connector

T20 - 20-pin connector

T32d - 32-pin connector

T73a - 73-pin connector

T73b - 73-pin connector

U1 - Cigarette lighter

(44) - Ground connection on A-pillar, lower left Locations

(86) - Ground connection 1 (in rear wiring harness)

(A167) - Positive connection 3 (30a) (in instrument panel wiring harness)

(B549) - LIN bus connection 2 (in main wiring harness)

* - Depending on equipment

Previous Diagram 37/3 (Tracks 15-28)

Next Diagram 37/5 (Tracks 43-56)