2.0L TFSI Engine

Brake Lamp Switch

Removing

Vehicles with 2.0L Gasoline Engine and Turbocharger






- Pull the engine cover upward at the attached points - arrows -.

- Remove the intake hose.

Continuation for All Vehicles

- Remove the noise insulation and the impact guard.

- Release and remove the connector - 1 -.






- Remove the bolt - 2 - from the master brake cylinder.

- Remove the brake lamp switch (F) - 3 - from under the master brake cylinder and from the clip - 4 -.

Installing

Install in reverse order of removal. Note the following:

- Install the brake lamp switch in the clip.

Tightening Specification