Trunk / Liftgate Latch: Service and Repair

Rear Lid Latch

Removing

• If the rear lid does not open, use the emergency release - 4 - inside the rear lid trim panel to open it manually. Refer to Owner's Manual.






- Removed trim panel rear lid lock..

- Disconnect the connector - 3 - from the rear lid lock - 1 -.

- Remove the bolts - 2 - and the rear lid latch - 1 - from the rear lid.

Installation

- Attach the rear lid latch - 1 - to the rear lid and install the bolts - 2 -.






Tightening specification - 2 -: 23 Nm

- Connect the connector - 3 - to the rear lid latch - 1 -.

- Install trim panel rear lid lock.

• Perform a function test on the unlocking components before closing the rear lid.