Interior Monitoring Deactivation Switch (E267)

Interior Monitoring Deactivation Switch (E267)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

The interior monitoring button (interior monitoring deactivation switch) is installed on the bottom of the left side trim panel.

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Unclip the switch - 1 - from the trim using the (VAS 3409).






- Disconnect the connector.

Installing

Install in reverse order of removal.