Wiper Frame with Linkage and Windshield Wiper Motor (V), Removing

Wiper Frame with Linkage and Windshield Wiper Motor (V), Removing

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the windshield wiper arms. Refer to => [ Wiper Arm ] Service and Repair.

- Remove the plenum chamber cover.

- Disconnect the connector - 1 -.






- Remove the bolts - arrows - and remove the wiper frame - 2 - from the vehicle.

Installing

Install in reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification shown in => [ Windshield Wiper System Overview ] Windshield Wiper System Overview.