Tires, Sealed with Sealant

Tires, Sealed with Sealant

Removing

Tires which have been filled or sealed with tire sealant, must be drained before removing from wheel.

• Do not let tire sealant come in contact with your eyes or skin.

• It is harmful to health, can cause eye irritation and allergies.

• Wear safety gloves and protective eyewear.

- Place the wheel on a flat surface.

- Remove the valve insert.

- Using a suitable drill bit or cutting bit, carefully drill a hole in the bead seat area of tire.






- Hold the wheel over a catch tray and let the sealant flow out.

- Remove the tire form the rim.

- Clean the rim with a damp cloth.

Mounting

• Make sure wheel rim is clean.

- Install a new tire valve using the (VAS 6459) - 1 -.






- Remove the valve insert.

- Inflate tire to approximately 3 to 4 bar, tire bead must slip audibly over rim hump when doing this.

- Install the valve insert.

- Check the tire pressure.

- Balance the tire.