Front Side Marker Lamp

Front Side Marker Lamp

Removing and installing the left front side marker lamp bulb (M33) / right front side marker lamp bulb (M34) is identical.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the wheel housing liner just far enough so that the side marker lamp is able to be accessed..

- Press the tabs in the - direction of the arrow - and release the side marker lamp - 1 -.






- Remove the bulb socket - 3 - and bulb - 2 - from the side marker lamp - 1 -.

- Remove the side marker lamp - 1 - from the bumper trim.

Installing

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check the functionality of the side marker lamp.