License Plate Bulb

License Plate Bulb

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the license plate lamp. Refer to => [ License Plate Lamps ] License Plate Lamps.

- Turn the lamp socket - 1 - in the - direction of the arrow - to release it and pull it out of the license plate lamp.






Bulbs: Glass base bulb W5W/12 V

Installing

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Make sure the license plate lamps are working properly.