Rear Bumper Cover Assembly Overview

Rear Bumper Cover Assembly Overview

• Depending on model version, there are minor differences in the rear bumper covers.






1 Center guide

2 Rear bumper cover

• PP/EPDM material

• Removing and Installing, refer to => [ Rear Bumper Cover ] Rear Bumper Cover

3 Bolt

• 1 on each side

• The tail lamp must be removed before removing and installing.

• Tightening specification: 2 Nm

4 Bolt

• 1 on each side

• Rear wheel housing Liner mount on the rear bumper cover

• Tightening specification: 2 Nm

5 Expanding rivet

• Quantity: 3

6 Bolt

• 3 on each side

• Rear wheel housing Liner mount on the rear bumper cover

• Tightening specification: 2 Nm

7 Expanding rivet

• 1 on each side

8 Side guide

• Left and right