Cell Phone Preparation, UHV High with Bluetooth

Cell Phone Preparation, UHV High with Bluetooth

The cell phone preparation "UHV high" is offered only together with a radio/RNS.

The "UHV high" is a permanently installed telephone (refer to cell phone operating electronics control module (J412) ) with wireless access to stored telephone data via a Bluetooth cell phone (R54).

The "UHV high" requires the cell phone be connected via a Bluetooth interface and supports the "Remote SIM Access Profile" (rSAP).

With (rSAP), telephone entries, for example, can be accessed on the cell phone SIM card.

Use "Guided Fault Finding" when servicing or performing Fault Finding with the Vehicle diagnostic tester.