Washer Fluid Level Switch: Service and Repair

Windshield Washer Fluid Level Sensor (G33)

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Remove tank for windshield washer system and headlamp cleaning system. Refer to => [ Windshield and Headlamp Washer Fluid Reservoir ] Windshield and Headlamp Washer Fluid Reservoir.

- Disconnect the connector - 1 - and remove the windshield washer fluid level sensor - 2 - from the rubber seal.






Installation

Install in reverse order of removal. Note the following:

- Bleed headlamp washer system after completing assembly work. Refer to => [ Headlamp Washer System, Bleeding ] Procedures.