Steering Angle Sensor: Service and Repair

Steering Angle Sensor, Basic Setting

Special tools, testers and auxiliary items required

• Vehicle diagnosis, testing and information system (VAS 5051B)

The steering angle sensor (G85) basic setting must be checked after the following assembly work:

• If the steering angle sensor was removed or replaced.

• After removing or replacing the steering column.

• After removing or replacing the steering gear.

• If the steering wheel was offset.

Basic Setting of the Steering Angle Sensor

Use the (VAS 5051B).

Body (Repair Group 01; 27; 50 through 97)

Electrical System (Repair Groups 01, 27 and 90 through 97)

01_OBD-capable systems

16 Steering column electronics control module J527

16 Steering column electronics control module functions

16 Steering column electronics control module basic setting (repair group 94)

Follow the instructions on the screen to perform the basic setting.