Rear Lid Remote Control Lock Switch (E233)

Rear Lid Remote Control Lock Switch (E233)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• Release Lever (T10039)

The rear lid remote control lock switch is installed in the drive door trim panel.

Removal

When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

- Turn off the ignition and all electric consumers and remove the key.

- Remove the driver door trim panel..

- Disconnect the connector - 1 -.






- Press the retainers in - direction of arrow - and remove the switch - 1 - from the driver door trim panel.






- Disengage retaining tabs - arrows - and remove switch from installation frame.






Installation

Install in reverse order of removal.