Body Controls - DTC 01232, A/C Compressor Control Valve
97 11 01February 23, 2011
2025605
Vehicle Information
Condition
Update Programming, DTC 01232 012 A/C Compressor Control Valve N280 Malfunction in Circuit - Static
Incorrect software in Body Control Module.
Software introduced as of VIN BP_BD003315.
Service
Verify Body Control Module Software:
^ Connect Midtronics Incharge (INC-940) Tester/Charger to vehicle's battery.
^ Connect VAS tester to vehicle.
^ Switch ignition ON.
^ Select Vehicle Self Diagnosis.
^ Select On Board Diagnostics (OBD).
^ Select 09 - Electronics Central Electrics. Write down the software level.
Update Programming Procedure:
Update the Body Control Module using the SVM Unit code as listed in the table.
^ Start Guided Fault Finding (GFF) and select vehicle.
After system interrogation is complete use forward arrow:
^ Select go to� Function Component Selection >> Software Version Management >> Adapting Software.
^ Follow system prompts and update the Body Control Module to SW 0092 using a GeKo ID and the SVM measure code 34B2.
Warning
Warranty
Required Parts and Tools
No Special Parts required
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.