Balance Shaft and Oil Pump Timing Chain Overview

Balance Shaft and Oil Pump Timing Chain Overview






1 Timing Chain

• Removing and installing, refer to => [ Balance Shaft and Oil Pump Chain ] Balance Shaft and Oil Pump Chain.

2 Sprocket

• For the oil pump.

• Installed position: The labeled side faces the engine.

3 Bolt

• 62 Nm

• If it is not possible to tighten the bolt to the specification, remove the lower oil pan and the oil baffle and counter hold the oil pump driveshaft bolt with an open end wrench.

4 Thrust Washer

5 Spring

6 Crankshaft

7 Bolt

• 23 Nm

8 Sprocket

• For the balance shaft.

• Installed position: The labeled side faces the transmission.

9 Bolt

• 9 Nm

• Quantity: 4

10 Chain Tensioner

• With the guide rail.

11 Gasket

• Always replace.