Front Door Cover

Front Door Cover

Removing

• Removal and installation are described only for the left front and rear door cover. The removal and installation of the right front and rear door cover are derived accordingly from this.

• The description applies to all models, for example, visual differences R-Line (in the vehicle color and chrome strip).






- Remove the bolt - 5 - from the inside of the door - 4 -.

- Pull the cover - 1 - out of the grommets - 2 - - arrows a -.

- Pull the cover - 1 - down - arrows b - off of the door.

Installing






- Check the grommets - 3 - and clips - 2 - for damage and replace if necessary.

- Slide the cover - 1 - from below onto the door - 4 - - arrows a -.

- Press the cover - 1 - with the clips - 2 - into the grommets - 3 - - arrows b -.

- Tighten the screw - 5 - on the inside of the door. Tightening specification: 2 Nm.