Resetting With Vehicle Diagnosis Tester

Service Interval Display, Resetting

Service interval display must be reset at:

• Vehicle delivery inspection

• Every service

- Connect the Vehicle Diagnostic Tester.

- Switch ignition on.

- Touch button/field on screen: GUIDED FUNCTIONS.

If the displays indicated in the procedure are not shown on the display. Refer to Operating Instructions for the Vehicle Diagnostic Tester.

- Press the > button to confirm.

- Select in succession:

• Brand

• Model

• Model year

• Engine Code

- Confirm vehicle identification.

- Select in succession:

• "Instrument cluster" - arrow -





• "Service interval display, resetting"

- Perform Adaptation according to instructions from "GUIDED FUNCTIONS".





End Adaptation

Indicated on display:

- Press the Go to button - arrow - on display.





- Press Exit button - arrow -on display.

- Press Exit button in exit menu.

- Turn off ignition and disconnect diagnostic connection.

- Switch ignition on.

After switching on the ignition, service event is no longer indicated in the odometer display in the instrument panel insert.

• The service interval display can also be reset manually. When resetting the service interval display manually, make sure the vehicle is coded for fixed intervals.