Diagram 138/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Front passenger airbag deactivation key switch, Airbag control module, Driver thorax airbag igniter, Front passenger thorax airbag igniter, Driver side rear thorax airbag igniter, Front passenger rear thorax airbag igniter

ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E224 - Front passenger airbag deactivation key switch, in the glove compartment Airbag Systems Overview

J234 - Airbag control module, under the center console Control Modules in Pass Compartment [1][2]Air Bag Control Module

N199 - Driver thorax airbag igniter Airbag Systems Overview Driver Thorax Airbag Igniter -N199-

N200 - Front passenger thorax airbag igniter Airbag Systems Overview Front Pass Thorax Airbag Igniter -N200-

N201 - Driver side rear thorax airbag igniter Airbag Systems Overview Driver Side Rear Thorax Airbag Igniter -N201-

N202 - Front passenger rear thorax airbag igniter Airbag Systems Overview Front Pass Rear Thorax Airbag Igniter -N202-

T2ap - Double connector

T2as - Double connector

T3k - 3-pin connector Component Locations

T3l - 3-pin connector Component Locations

T3s - 3-pin connector

T3u - 3-pin connector

T6e - 6-pin connector

T100 - 100-pin connector

(109) - Ground connection (in airbag wiring harness)

* - Depending on equipment

Previous Diagram 138/4 (Tracks 29-42)

Next Diagram 138/6 (Tracks 57-70)